General Hobby Tools

Hobby Knife Kit in Wooden Box by Excel

Made in USA

This american made hobby knife starter kit has a K1, K2 & K5 knives with 13 assorted blades that is housed in a wooden display box.

Retail price $19.99

70225
Weight: 2.00 lbs

Click here for more product information

Handyman Set in Wooden Box by Excel

Click Here

Made in USA

This american made handyman set is housed in a beautiful wooden display box and includes:
1- K2 Medium Duty Knife
1- K7 Woodcarving Knife
8 Assorted Blades

Excel # 44285
Retail price $21.99

70220
Weight: 2.00 lbs

Click here for more product information

Model Airplane Tool Kit in Wooden Box by Excel

Click Here

Made in USA

This american made deluxe airplane kit has 1 K1 knife, 1 needle nose pliers with side cutter, 2 needle files, 1 sharp pointed and 1 curved pointed tweezers, 1 swivel head screwdriver, 1 large and one small clamp, 1 snap blade knife, 1 sanding stick and 3 assorted knife blades in a wooden display box.

Retail price $41.99

70226
Weight: 2.00 lbs

Click here for more product information

Model Railroad Tool Kit in Wooden Box by Excel

Click Here

Made in USA

This american made deluxe railroad kit has 1 each K1 and K2 knives, 1 needle nose pliers with side cutter, 2 needle files, 1 6" stainless steel ruler, 1 miter box, 1 razor saw,1 swivel head pin vise, 3 assorted drills, 2 swivel head screwdriver, 1 snap blade knife, 1 sanding stick, 3 assorted knife blades and 1 Swiss style mini-hammer in a wooden display box.

Retail price $59.99

70227
Weight: 2.00 lbs

Click here for more product information

Model Ship Builders Kit in Wooden Box by Excel

Click Here

Made in USA

This american made deluxe model ship builders kit has 1 each K1, K2 and K5 knives, 1 needle nose pliers with side cutter, 1 needle point awl, 1 sharp pointed tweezers, 1 miter box, 1 razor saw, 1 sanding block, 4 assorted gouges, 16 assorted blades, 3 assorted drills in a wooden display box.

Retail price $53.99

70228
Weight: 2.00 lbs

Click here for more product information

Deluxe Knife Kit and Tool Chest by Proedge #30860
WEEKLY SPECIAL

Was Is

Click Here

SPECIAL PRICE

Made in USA

This american made set contains 1 of each #1, #2 and #5 precision, medium and heavy duty knives with 21 assorted blades and gouges, screwdrivers, pinpoint stylus, mitre box, razor saw blade and sander block with sandpaper and wedge all in a wooden box.

Retail price $49.99

70210
Weight: 2.00 lbs

Click here for more product information

Self Adjusting Wire Stripper Blue and Yellow
Purchase 2 or more at $6.00 each

Click Here

This compact self adjusting wire stripper is especially designed for 16 to 24 gauge wire. With little effort it easily handles stranded and solid wire without nicking or damaging the wire. This wire stripper has a built in cutter and adjustable stop for wire stripping length.

40004
Weight: 0.20 lbs

Click here for more product information

Automatic Wire Stripper Economical
Purchase 2 or more at $3.50 each

Click Here

This economical wire stripper cuts and strips wire 18 to 24 gauge. There is no need to know the wire size, just put the wire in squeeze and the stripper does the rest. This is the tool you must have whether you need to strip wire once a year or every day.

40000
Weight: 0.20 lbs

Click here for more product information

Automatic Wire Stripper Medium Duty
Purchase 2 or more at $4.50 each

Click Here

This wire stripper cuts and strips wire 18 to 24 gauge. There is no need to know the wire size, just put the wire in squeeze and the stripper does the rest. This is the tool you must have whether you need to strip wire once a year or every day.

40002
Weight: 0.20 lbs

Click here for more product information

Adjustable Cutter and Stripper
Purchase 2 or more at $2.50 each

Click Here

Perfect for precision stripping and flush cutting of wire 12 to 24 gauge. Easily adjusted with a screwdriver, the dial assures perfect stripping and is spring loaded for easy use. The tool has a black oxide finish with plastic cushion grip handles.

40008
Weight: 0.20 lbs

Click here for more product information

Weller Soldering Gun Kit

Click Here

This multi-purpose soldering gun kit features duel temperature settings of 100 or 140 watts. It has a built in light, an 8 piece kit including 3 different tips, 3 feet of lead free solder, paste-flux brush, soldering aid tool, instructions and a plastic storage case. UL listed with a 7 year warranty.

Regular price $49.95

96065
Weight: 2.00 lbs

Click here for more product information

Pry Bar

Click Here

This small pry bar is handy for removing small items. 5 ¼ inches long and ½ inch wide.

10307

Click here for more product information

Track Pry Bar

Click Here

Made in USA

An American made 7 inch super handy tool to remove track nails or pry up items already glued or nailed on the layout.

10308
Weight: 0.05 lbs

Click here for more product information

Ultra Ruler 6 inch

Click Here

This 6 inch American made flexible steel ruler has micro-fine marking slots at 1/32 inch and millimeters . No more squinting to line up your pencil or scribe.

Free marking pencil Included

10370
Weight: 0.10 lbs

Click here for more product information

90° Bend Ultra Ruler 6 inch

Click Here

Made in the USA

Stainless steel ultrabend ruler with 90° bend for edge layouts. It has 16ths and 32nds with edge graduations. One side is 7/8 inch wide and other side is 3/4 inch. It has micro-fine top and bottom guide holes. Great for quick accurate inside, outside and diameter measurements.

10377
Weight: 0.15 lbs

Click here for more product information

Ultra Ruler 12 inch

Click Here

This 12 inch American made flexible steel ruler has micro-fine marking slots at 1/32 inch and tenths . No more squinting to line up your pencil or scribe.

Free marking pencil Included

10372
Weight: 0.10 lbs

Click here for more product information

90° Bend Ultra Ruler 12 inch

Click Here

Click here for more product information

Ultra Precision Centering Ruler 12 inch

Click Here

Made in the USA

This 12 inch flexible stainless steel centering ruler has micro-fine top and bottom guide holes every 1/32 inch that lets you plot perfectly symmetrical marks from the exact center of any work piece up to 12 inches wide. This ruler also has a built-in protractor that has guide slots to position your mark exactly at 5 degree intervals from 0 to 180 degrees, plus extra marks at 22.5, 67.5, 112.5 and 157.5 degrees.

10375
Weight: 0.25 lbs

Click here for more product information

Rule With Drill Bit Gauge 6 inch
Purchase 2 or more at $2.50 each

Click Here

A super handy 6 inch stainless steel rule with inches and mm, including a drill bit gauge with the following sizes 1/16, 5/64 3/32, 1/8, 9/64 5/32, 11/64 3/16, 13/64, 7/32 & 1/4.

10366

Click here for more product information

Screw or Part Grabber 5 Finger

Click Here

Push down on the top, out pops 5 little fingers to grab screws, nuts or parts on your bench. The tool is 4 ½ inch long and spring loaded to hold the parts tight. This tool is used extensively in the jewelry and miniature industry.

20600
Weight: 0.05 lbs

Click here for more product information

Screw or Part Grabber 4 Finger

Click Here

Push down on the top, out pops 4 little fingers to grab screws, nuts or parts on your bench. The tool is 4 ½ inch long and spring loaded to hold the parts tight. This tool is used extensively in the jewelry and miniature industry

20601
Weight: 0.05 lbs

Click here for more product information

4 in 1 Tool

Click Here

Another one of those great tools with multiple uses. Extends to over 24 inches, has a mirror, lighted magnet, magnetic cap, and scribe. Batteries included.

20610
Weight: 0.20 lbs

Click here for more product information

Telescoping Mirror

Click Here

This 1 ¼” glass mirror telescopes from 6 ½” to 18” long. Has a pocket clip and a chrome finish.

20612
Weight: 0.10 lbs

Click here for more product information

Magnetic Pickup Telescoping

Click Here

Made in USA

This is an AMERICAN MADE, SUPER STRONG, handy tool for getting dropped items out of tight spaces. The head is only a ¼ inch wide but super powerful. It telescopes from 5 1/2 inches to 16 inches and can lift 32 times its own weight.

Picks up over 2 pounds

20700
Weight: 0.05 lbs

Click here for more product information

Magnetic Pickup Telescoping Soft Handle

Click Here

This is a SUPER STRONG handy tool for getting dropped items out of tight spaces. The handle has a soft black foam and the head is a 3/4 inch wide but super powerful. It telescopes from 6 1/2 inches to 25 inches and can
LIFT OVER 2 1/2 POUNDS

20702
Weight: 0.15 lbs

Click here for more product information

Magnetic Pickup Telescoping with Flexible Head

Click Here

This is a SUPER STRONG handy tool for getting dropped items out of tight spaces. The head is a 1/2 inch wide but super powerful. It telescopes from 5 1/2 inches to 22 inches and can
LIFT OVER 2 1/2 POUNDS

20703
Weight: 0.15 lbs

Click here for more product information

Magnetic Pickup with Flexible Handle

Click Here

This is a handy tool for getting dropped items out of tight spaces. The magnet is only ¼ inch wide but super powerful. The handle is 4 inches and the flexible wire is 15 inches. The flexible wire can be bent and re-bent in any shape.

Specifications:
Total Length 20 inches
Handle Length 4 inches
Can lift up to 1.7 lbs(0.77 kgs)

20705
Weight: 0.05 lbs

Click here for more product information

Tool Magnetizer-Demagnetizer

Click Here

Insert a screwdriver, plier, tweezer, or any tool into the bottom hole and it becomes magnetized, to demagnetize, insert the same tool into the top hole. It really works. Why buy magnetized tools, use your favorite tool and just magnetize when you need it.

20710
Weight: 0.10 lbs

Click here for more product information

Magnetic Bowl

Throw those parts into the bowl, won't leave till you pick them up. Super strong magnetized bowl with a rubber base but still sticks to anything iron or steel.

20712
Weight: 1.25 lbs

Click here for more product information

SAE Allen Set

Click Here

A nice 8 piece set ranging in sizes from 1/16 to 1/4 inch. Lengths vary from 2 to 3 inches. Handy set to have to open transformers etc. Finish may vary.

21636
Weight: 0.25 lbs

Click here for more product information

Metric Allen Set

Click Here

A nice 8 piece set ranging in sizes from 1.5mm to 6 mm. Lengths vary from 2 to 3 inches. Handy set to have to open transformers etc Finish may vary.

21637
Weight: 0.25 lbs

Click here for more product information

Complete Hobby Repair & Building Kit

Click Here

Lifetime Warrenty

This set has 27 pieces, all american sizes (SAE), perfect for model train or airplane repair and building. Five nut drivers 1/8 to 3/16, five open ends 1/8 to 1/4, six screw drivers 1/32 to 9/64, two phillips #1 and #2, three hex 1/16 to 3/32 and four pairs of pliers cutter, needle, flat and end. Also a super molded carring case.

21650
Weight: 5.00 lbs

Click here for more product information

Pin Punch 4 Piece Set

Click Here

A good item to help remove rivets when fixing or restoring trains. Short of a press, this set will remove some of the smallest rivets. It has a 1/16, 3/32, 1/8 and 5/32.

25000
Weight: 0.25 lbs

Click here for more product information

Pin Punch 8 Piece Set

Click Here

A good item to help remove rivets when fixing or restoring trains. Short of a press, this set will remove some of the smallest rivets. It has a 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 5/16.

25005
Weight: 0.25 lbs

Click here for more product information

Center Punch 5 Piece Set

Click Here