This super little clamp is spring loaded, push to open, insert part and let go.  The springs gently hold the part while you repair or glue from “0” to 1 ½”.

This 4 piece set is super.  Two powerfully sprung padded surface  2 ¼” capacity needle nose that taper to a slim 3/16” to reach into small spaces.  The other 2 are ratchet action clamps with pivoting jaw pads that open to 1 ½” to handle  flat or tubular items.

Competitors price $9.95, my price $4.95

I have been using this for years and just found a supplier. Interesting corner clamp for gluing.  Will go from 0 to 3” and has a 45^o for cutting.

This items is new and improved with a larger handle and button for easier use.  It ratchets in small increments from 0 to 1 ¼ in (3 cm) with pivoting jaws and quick release.

This super handy clamp ratchets from 0 to a 1 3/4 inch opening. The pivoting jaws are 3/4 inch square and the clamp is 3/4 inch wide.

A super addition to your bench.  The base has a magnetic strip to hold onto the surface.  Each size clamp fits into the groove for upright work.  The openings are 3/4”, 1 1/4” and 1 1/2”.

These quick ratcheting bar clamps and spreaders provide easy one-handed clamping.  Quickly converts from a bar clamp  (4 ¼” to “0”) to a spreader (3 ¾” to 7 ¼” )  They have non-marring pads that are ideal for delicate materials.

You have seen the name brands for $9.95 each.

This vise has jaws that are covered with non-slip plastic allowing safe handling of delicate materials. The jaw is 3 inches wide, with a maxium opening of 4 inches. The overall length is 10 ½ inches. The jaws can be rotated to any possible angle.
Specification:
Jaw Opening 4 inches
Jaw Width 3 inches

This is an all metal 6 inch (152mm) bar clamp made by Alltrade Inc. Great for woodworking, clamp quickly and firmly with this strong clamp. It has a 3 inch deep throat clamping capacity, multiple clutch plates, wood handle and soft plastic pads.

This is an all metal 18 inch (457mm) bar clamp made by Alltrade Inc. Great for woodworking, clamp quickly and firmly with this strong clamp. It has a 3 inch deep throat clamping capacity, multiple clutch plates, wood handle and soft plastic pads.

This is an all metal 24 inch (610mm) bar clamp made by Alltrade Inc. Great for woodworking, clamp quickly and firmly with this strong clamp. It has a 3 inch deep throat clamping capacity, multiple clutch plates, wood handle and soft plastic pads.