Home >

Dremel Style Accessories

Craftsman Flex-Shaft Attachment 
   Add to basketBasket
Click Here
Click Here
 

Tight spots, nooks, crannies, corners - they're all easily within reach when you add the Flex-Shaft Attachment to a Craftsman corded or cordless rotary tool. The flexible, 36" shaft attaches easily and adds a new level of versatility to your project capabilities, with fingertip control for polishing, carving, sanding, engraving and more.

Features:
  • Comfort grip handpiece - allows fingertip control to cut, grind, sand, polish and more
  • Integrated shaft lock button - for easy accessory changes
  • More flexible cable - new 5" bend radius provides more flexibility during use
  • Quick connect -attaches to your rotary tool in seconds
  • For Craftsman or Dremel use with models 275, 285, 395, 398, 780 and 800

    •
    95809
    Weight: 1.00 lbs

    Click here for more product information

    Flexible Shaft for Rotary Tools 
       Add to basketBasket
    Click Here
    Click Here
     

    Tight spots, nooks, crannies, corners - they're all easily within reach when you add the Flex-Shaft Attachment to a Dremel or Craftsman corded or cordless rotary tool. The flexible, 36" shaft attaches easily and adds a new level of versatility to your project capabilities, with fingertip control for polishing, carving, sanding, engraving and more This 36 inch long flexible shaft will give you fingertip control with your rotary tool. For Craftsman or Dremel use with models 275, 285, 395, 398, 780 and 800


    95817
    Weight: 1.00 lbs

    Click here for more product information

    Cut Off Disk Regular 20 count Pack 
       Add to basketBasket
    Click Here
    Click Here
     

    Made in the USA

    These are 20 regular cut off disks . They are 1 inch in diameter by 1/32 inch thick and have a standard 1/16 inch hole. Use with mandrel 95301.
    95000
    Weight: 0.10 lbs

    Click here for more product information

    1 1/4 inch Cut Off Disks - 3 pack 
       Add to basketBasket
    Click Here
    Click Here
     

    Made in the USA

    3 – 1 Ľ” AMERICAN MADE  reinforced cut off disks with a 1/16” hole (the regular mandrill).  They don’t shatter!!!
    95004
    Weight: 0.15 lbs

    Click here for more product information

    3 Pack of 1 1/2 inch Reinforced Cutting Disks 
    2 or more packs, $3.50 per pack
       Add to basketBasket
    Click Here
    Click Here
     

    Made in the USA

    This is a super fiberglass reinforced cutting disk that will fit any moto tool like Dremel®, with the correct mandrel. These are the disks the pro's and clubs use to build their layouts. These disks are 1 ˝ inch in diameter by 1/32 inch thick and have a 1/8 inch hole. They come in a pack of 3 pieces. This is not the normal mandrel, order number 95302. Use on slow, not for use with single speed tools.
    95005
    Weight: 0.10 lbs

    Click here for more product information

    3 Pack Of 2 inch Reinforced Cutting Disks 
    2 or more packs, $4.50 per pack
       Add to basketBasket
    Click Here
    Click Here
     

    Made in the USA

    This is a super fiberglass reinforced cutting disk that will fit any moto tool like Dremel®, with the correct mandrel. These are the disks the pro's and clubs use to build their layouts. These disks are 2 inch in diameter by 1/32 inch thick and have a 1/4 inch hole. They come in a pack of 3 pieces. This is not the normal mandrel, order number 95303. Use on slow, not for use with single speed tools.
    95006
    Weight: 0.10 lbs

    Click here for more product information

    3 Pack Of 3 inch Reinforced Cutting Disks 
    2 or more packs, $5.50 per pack
       Add to basketBasket
    Click Here
    Click Here
     

    Made in the USA

     This is a super fiberglass reinforced cutting disk that will fit any moto tool like Dremel®, with the correct mandrel. These are the disks the pro's and clubs use to build their layouts. These disks are 3 inch in diameter by 1/32 inch thick and have a 1/4 inch hole. They come in a pack of 3 pieces. This is not the normal mandrel, order number 95303. Use on slow, not for use with single speed tools.
    95007
    Weight: 0.10 lbs

    Click here for more product information

    Diamond Cut Off Disk 3/4 inch Regular 
       Add to basketBasket
    Click Here
    Click Here
     

    These 3/4 inch super cutting disks will not shatter. Diamonds bonded on steel. Great for cutting track, plastic kits and many more items. The train clubs swear by them. You can also use the surface to sand. The disk is 1/32 inch thick and has a 1/16”hole. Uses the normal mandrel.


    95040
    Weight: 0.01 lbs

    Click here for more product information

    Mandrel 1/8 inch Screw and 1/8 inch Shaft 
       Add to basketBasket
    Click Here
    Click Here
     

    This mandrel is used with all items that have an 1/8'' hole. It has an 1/8'' shaft and will fit the  Dremel® and all other hobby moto tools.  Not for single speed units, must use on slow.
    95302
    Weight: 0.05 lbs

    Click here for more product information

    3/4 Diamond Cut Off Disks 5 Piece Set 
       Add to basketBasket
    Click Here
    Click Here
     

    This 5 piece  3/4" x 1/32" x 1/16" cut off disks is diamonds bonded on steel and will cut through almost anything except hardened steel. Can not shatter. You can use the face of the disk to smooth and sand. $12.00

    Free Mandrel #95301 Included
    95041
    Weight: 0.02 lbs

    Click here for more product information

    7/8 Diamond Cut Off Disks 5 Piece Set 
    Purchase 2 or more sets at $10.00 per set
       Add to basketBasket
    Click Here
    Click Here
     

    This 5 piece diamond cutting set is perfect for cutting hard as well as soft items.  The disks are 7/8” wide & 1/32” thick and comes with an 1/8” mandrel.

    Free Mandrel #95301 Included
    95037
    Weight: 0.02 lbs

    Click here for more product information

    Diamond 3/4 inch Wheels with Mandrels 5 Piece Set 
       Add to basketBasket
    Click Here
    Click Here
     

    This 5 piece set includes three Diamond Wheels and two Mandrels. These are used for cutting, grinding and cleaning.
    Dimensions:
    One wheel measures 1/8 inch (3 mm) thick
    One wheel measures 1/4 inch (6.5 mm) thick
    One V-wheel that measures 1/4 inch (6.5 mm) thick at the center
    and less than 1/64 inch (0.40 mm) at the outer ring
    Two Mandrels that each have a 1/8" (3 mm) shank
    95046
    Weight: 0.20 lbs

    Click here for more product information

    Diamond 1 1/2 inch Wheel with Mandrel 2 Piece Set 
       Add to basketBasket
    Click Here
    Click Here
     

    This 2 piece set includes a large Diamond Wheel and Mandrel. These are used for cutting, grinding and cleaning.
    Dimensions:
    V-wheel that measures 1/4 inch (6.5 mm) thick at the center
    and less than 1/64 inch (0.40 mm) at the outer ring
    Mandrel has a 1/8" (3 mm) shank
    95047
    Weight: 0.20 lbs

    Click here for more product information

    Large Diamond Cut Off Disk 1 1/2 inch Fine 
    Purchase 3 or more at $4.00 each
       Add to basketBasket
    Click Here
    Click Here
     

     This 1 1/2 inch  x 1/16 inch  x 1/16 inch fine diamond cut off disk is diamond bonded on steel and will cut through almost anything except hardened steel.  Can not shatter.  The edge cuts and the face can be used for smoothing and sanding.   Use mandrill #95301
    Only use with multi speed tool on slow.


    95050
    Weight: 0.05 lbs

    Click here for more product information

    Large Diamond Cut Off Disk 1 1/2 inch Medium 
    Purchase 3 or more at $4.00 each
       Add to basketBasket
    Click Here
    Click Here
     

    This 1 1/2 inch  x 1/16 inch  x 1/16 inch medium diamond cut off disk is diamond bonded on steel and will cut through almost anything except hardened steel.  Can not shatter.  The edge cuts and the face can be used for smoothing and sanding.   Use mandrill #95301
    Only use with multi speed tool on slow.


    95051
    Weight: 0.05 lbs

    Click here for more product information

    Large Diamond Cut Off Disk 1 1/2 inch Coarse 
    Purchase 3 or more at $4.00 each
       Add to basketBasket
    Click Here
    Click Here
     

    This 1 1/2 inch  x 1/16 inch  x 1/16 inch coarse diamond cut off disk is diamond bonded on steel and will cut through almost anything except hardened steel.  Can not shatter.  The edge cuts and the face can be used for smoothing and sanding.   Use mandrill #95301
    Only use with multi speed tool on slow.


    95052
    Weight: 0.05 lbs

    Click here for more product information

    3 Piece Large 1 ˝ inch Diamond Cut Off Disk Set 
       Add to basketBasket
    Click Here
    Click Here
     

    This three piece set of fine, medium and coarse 1 1/2 inch  x 1/16 inch  x 1/16 inch diamond cut off disks are diamond bonded on steel and will cut through almost anything except hardened steel.  Can not shatter.  The edge cuts and the face can be used for smoothing and sanding.   Free mandrill #95301

    Only use with multi speed tool on slow.

    Free Mandrill with three piece Set

     
    95054
    Weight: 0.07 lbs

    Click here for more product information

    Diamond Cutting Disk Set 10 pieces 
    Was    Is    Add to basketBasket
    Click Here
    Click Here
     


    This set consists of 10 diamond cut off disks with mandrels. Each mandrel is a standard 1/8" shaft and each disk is about 1/32 thick.
    This set contains one of each size listed
    1 1/2", 1 1/8", 1", 3/4", 3/4", 5/8", 7/8" standard diamond disks
    and
    1", 7/8" and 3/4" with 8 Holes in the Blade.
    95060

    Click here for more product information

    Steel Saw Blade Coarse 7/8 inch 
    Purchase 2 or more at $5.00 each
       Add to basketBasket
    Click Here
    Click Here
     

    This is a 7/8 inch 28 teeth steel saw blade that is 1/50 inch thick and has a 1/8 inch hole. Order mandrel number 95302. Only use with multi speed tools on slow.
    95220
    Weight: 0.10 lbs

    Click here for more product information

    Steel Saw Blade Coarse 1 1/4 inch 
    Purchase 2 or more at $5.00 each
       Add to basketBasket
    Click Here
    Click Here
     

    This is a 1 1/4 inch hardened steel coarse saw blade that is 1/32 inch thick and has a 1/4 inch hole. Order mandrel number 95303. Only use with multi speed tools on slow.
    95200
    Weight: 0.10 lbs

    Click here for more product information

    Steel Saw Blade Fine 1 1/4 inch 
    Purchase 2 or more at $5.00 each
       Add to basketBasket
    Click Here
    Click Here
     

    This is a 1 1/4 inch hardened steel fine saw blade that is 1/32 inch thick and has a 1/4 inch hole. Order mandrel number 95303. Only use with multi speed tools on slow.
    95202
    Weight: 0.10 lbs

    Click here for more product information

    Steel Saw Blade 2 inch 
       Add to basketBasket
    Click Here
    Click Here
     

    This is a 2 inch hardened steel saw blade that is 1/32 inch thick and has a 1/4 inch hole. Order mandrel number 95303. Only use with multi speed tools on slow.
    95215
    Weight: 0.10 lbs

    Click here for more product information

    1 inch Steel Saw Blade 3 Piece Set 
       Add to basketBasket
    Click Here
    Click Here
     

    A great addition to your moto tool set.  One mandrill 1/8 inch x 1/8 inch, one saw with 32 teeth and one with 68 teeth.  Both 1 inch in diameter and 1/50 inch (0.50mm) thick.
    95217
    Weight: 0.15 lbs

    Click here for more product information

    Flap Wheel 6 Piece Set 
       Add to basketBasket
    Click Here
    Click Here
     

    These 1 1/2 inch x 3/8 inch wheels are used for sanding and general clean-up of irregular or curved sections of wood, metal and fiberglass. They are self conforming on any shape or surface. They are ideal for hard to finish sharp corners, narrow channels, round concave or convex areas. As these flaps wear, new abrasive is constantly being exposed. Excellent alternative to wire wheel brushes, grit-impregnated nylon brushes, and fibrous wheels, all of which become less efficient with use. They are mounted on 1/8 inch shanks. This set contains grits of 60, 80, 100, 120, 150 & 180.

    Specifications:
    Grits 60 - 80 - 100 - 120 - 150 - 180
    Shank Size 1/8 inch
    Head Diameter 1 1/2 inch x 3/8 inch
    95030
    Weight: 0.10 lbs

    Click here for more product information

    Mandrel 1/16 inch Screw and 1/8 inch Shaft 
       Add to basketBasket
    Click Here
    Click Here
     

    This is the standard mandrel with a 1/16 screw and a 1/8 shaft that comes with Dremel® . It will fit all other hobby moto tools. Not for single speed units, must use on slow.
    95301
    Weight: 0.05 lbs

    Click here for more product information

    Mandrel 1/4 inch Screw and 1/8 inch Shaft 
       Add to basketBasket
    Click Here
    Click Here
     

    This mandrel is used with all items that have a 1/4'' hole. It has an 1/8'' shaft and will fit the  Dremel® and all other hobby moto tools.  Not for single speed units, must use on slow.



    95303
    Weight: 0.05 lbs

    Click here for more product information

    Four Piece Collet Set 
       Add to basketBasket
    Click Here
    Click Here
     

    This is a Four Piece Collet Set that goes from 0 to a 1/8 inchs. These will fit Dremel® and most other moto tools.
    95410
    Weight: 0.10 lbs

    Click here for more product information

    Keyless Finger Chuck 
       Add to basketBasket
    Click Here
    Click Here
     

    This is a Keyless Finger Chuck that goes from 0 to 1/8 inch. It only fits the following Dremesl® #275, 285, 410, 595, 851, 950 and the new Ryobi.
    95420
    Weight: 0.15 lbs

    Click here for more product information

    Dremel® #4486 Chuck 
       Add to basketBasket
    Click Here
    Click Here
     

    The Dremel Chuck allows you to quickly and easily change accessory bits on Dremel corded rotary tools or the 9.6V Cordless MultiPro without changing collets.  It will accept all accessory bits with 1/32" to 1/8" shanks. (#275 Single-Speed MultiPro® Rotary Tool #2850-01 Two-Speed MultiPro® Rotary Tool Kit #395 Variable-Speed MultiPro® Rotary Tool #398 Digital Rotary Tool #7800-01 9.6V Cordless MultiPro® Rotary Tool Kit & the 595.)

    For use with the following Dremel Tools

    275, 285, 395, 398, 400 750, 770, 780 and 800

    Also use with Dremel attachments 212, 225, and 575
    95423
    Weight: 0.25 lbs

    Click here for more product information

    Keyless Chuck 
       Add to basketBasket
    Click Here
    Click Here
     

    This keyless chuck will fit any Dremel®, Ryobi, Wizard and all other moto tools. It has a standard 1/8 inch shaft and the chuck will open from 0 to 1/8 nch.
    Never change a collet again
    95430
    Weight: 0.50 lbs

    Click here for more product information

    Finger Chuck with Collets 
       Add to basketBasket
    Click Here
    Click Here
     

    This is a Finger Chuck with a 3/32 shaft. I will give you a free 3/32 collet just in case you don't have one. It goes from 0 to 3/32. For best results, I advise you to cut the shaft a little and always start at the lowest speed. I have sold hundreds of these with great results.
    95450
    Weight: 0.15 lbs

    Click here for more product information

    Mini Finger Chuck 
       Add to basket