Scale Train Tools

 

Trip Pin Pliers HO, HOn3, ON3, S

10250
!
This stainless steel plier makes bending the trip pins on HO, Hon3, ON3 and S very easy. This is much easer then using a pair of needle nose and guessing at the bend.

Trip Pin Pliers N and HO

10251
!
This is primarily an N trip pin plier but can also be used for most of the HO sizes. Stainless steel with vinyl grips, does a great job.

HO/N Track Nailer

10300
!
Made in USA

An American made spring loaded magnetized track nailer makes life easy when putting down track. Pull back on the shaft, touch the head of the nail and instantly it goes in the shaft. Put the nailer in a vertical position over the hole and press down - done! Also available for Z guage.

Pry Bar

10307
!
This small pry bar is handy for removing small items. 5 ¼ inches long and ½ inch wide.

Track Eraser / Cleaner

10310
!
Purchase 2 or more sets at $2.50 each
Made in USA

A great little eraser for cleaning HO, N, Z & G track of hard to remove dirt. Can also be used for Slot Car track and Slot Car pick-ups. Can be used to remove rust from some materials. A very handy little accessory.

Model Railroad Scale Ruler 6 inch

10368
!
Purchase 2 or more at $3.50 each
This stainless steel model railroad ruler comes with Z, N, HO, S & O scales. It is the perfect size to fit in your pocket and go anywhere.

Model RR clubs can call for special pricing on 12 or more pieces

Scale Steel Ruler 12 inch

10360
!
Made in USA

American made 12" steel ruler for HO, N, S & 0 scales. Has 3.5mm for HO, 1.92mm for N, 3/16" for S, ¼" for O with 1/160 & 1/64 scales. It also has drill and screw sizes on the back. A super accessory needed by every modeler.

G Scale Metal Ruler

10362
!
This is a very easy to read ruler for G Scale builders.  It has the following sizes, 1:72 (1/6" = 1 foot), 1:24 (1/2" = 1 foot), 1:48 (1/4" = 1 foot), 1:35 and 1:25.

Ultra Ruler 12 inch Millimeters

10373
!
This 12 inch American made flexible steel ruler has micro-fine marking slots at 1/32 inch and millimeters. No more squinting to line up your pencil or scribe.

Free marking pencil Included

S Scale Template

10387
!
This template will enable you to save time and costly mistakes in planning. It will aid you in quickly and easily designing even the most complicated track plan.

Split Head Screw Starter Ultra Mini

20199
!
Made in USA
This American made 5 inch screw starter will solve all your problems of lost screws on the floor. Put the screw on the end, slide the plastic shaft down and that's it. This size will hold the smallest screws 0-80
NEVER DROP A SCREW AGAIN

Specifications:
Length 5 inches
0-80 and other extremely tiny screws
Quick-Wedge # 1253B

Phillips Screw Starter for #00 to #1

20208
!
Reserve Yours Today

Your credit card will NOT be charged until we ship in
August 2014
Made in USA

This American made Phillips screw starter is only 3/16 inch thick to get into those hard to reach places. It is 6 inch long and will accommodate #'s 00 to 1 Phillips screws. Perfect for N, HO, and some O and S. Great for slot cars, toys and general all around use in the home.

NEVER DROP A SCREW AGAIN

Slotted Screw Starter for #00 to #1

20212
!
Reserve Yours Today

Your credit card will NOT be charged until we ship in
August 2014
Made in USA

This American made slotted screw starter is only 3/16 inch thick to get into those hard to reach places. It is 6 inch long and will accommodate #'s 00 to 1 slottted screws. Perfect for N, HO, and some O and S. Great for slot cars, toys and general all around use in the home.

NEVER DROP A SCREW AGAIN

12 in 1 Screw Driver

20517
!
2002  #1 NEW TOOL AT THE  CHICAGO HARDWARE SHOW!
If there was ever the perfect hobby screw driver here it is.  All hardened tips, Phillips – 00, 0 & 1, Torx  5, 6, 7, 8, 10 & 15 and 3 super small slotted.  Magnetizer, demagnetizer, stubby screwdriver, pocket clip and built in extension. Closed it is 6” and extends to over 8 ½.

Precision Screw Driver 6 Piece Set All Phillips

20880
!
This 6 piece set contains 6 phillips screw drivers 0000, 000, 00, 0, 1 and 1.5. Each screw driver has a swivel top that is perfect for those small jobs or working on trains, slot cars, model airplanes, miniatures or doll houses. Comes in a plastic case

Mini Metric Nut Driver 5 Piece Set

21620
!
This 5 piece set contains metric nut drivers 3.0mm, 3.5mm, 4.0mm, 4.5mm and 5.0mm. Each nut driver is 4 inches long and has a swivel top that is perfect for those small jobs working on trains, race car sets and model airplanes. Perfect for HO, N, Z and G guage and any new train made overseas. Comes in a plastic case.

Mini SAE Nut Driver 5 Piece Set

21619
!
This 5 piece set contains SAE nut drivers 3/32, 1/8, 5/32, 3/16 and 1/4 inch. Each nut driver is 4 inches long and has a swivel top that is perfect for those small jobs working on trains, race car sets and model airplanes. Perfect for HO, N, Z and G guage and any new train made overseas. Comes in a plastic case.

Mini Metric Open End Wrench 5 Piece Set

21630
!
This mini 5 piece set contains metric wrenchs 4.0mm, 4.5mm, 5.0mm, 5.5mm and 6.0mm. Great for newer imported models. Comes with a plastic case.

Metric 21 Piece Set

21645
!
This is the ulimate set, it contains 5 wrenches 4.0, 4.5, 5.0, 5.5 and 6.0, 2 phillips screw drivers #0 and #1, 3 hex keys 1.5, 2.0 and 2.5, 5 nut drivers 3.0, 3.5, 4.0, 4.5 and 5.0 and 6 slotted screw drivers 0.9 to 3.8mm. This set also includes a sturdy plastic case.

Mini Needle Files 12 Piece Set

30110
!
This 12 piece set will get you into places that the larger ones can't. These files are 2mm x 100mm. Great for dollhouses, HO, N, and Z train sets as well as any use where the area is restricted. Perfect for working in plastic, metal or wood and comes in a plastic pouch.

Diamond Reamer 4 Piece Set

30294
!
This diamond reamer set will allow you to open holes or just ream anything needed in the hobby line.  A very nice inexpensive set.

Diamond Reamer 3 Piece Set

30293
!
This diamond reamer set will allow you to open holes or just ream anything needed in the hobby line.  A very nice inexpensive set.

90 Degree Cutters

60552
!

A real neat pair of FLUSH CUTTERS will get you into tight places on an electronic board or cutting out those sprues on your hobby kits.

Hard Wire Bender

60577
!
Super pair of pliers for bending hardened wire.  Great for piano or other thin tough to bend items.