!

Sanding Stick
94105
!
This 5 piece set consists of one each 600, 400, 320, 240 and 120 grit sticks and will make sanding in tight places very easy. You can rotate the belt as it wears. Never wrap a piece of sand paper around some hard surface to get into a small area. Belts are available for replacement

Digital Caliper 6 inch Read Out in Fractions
10357
!
This 6 inch electronic digital caliper has manual power on and off so it won't go off and lose your measurement. There are three buttons. One turns on the power and sets the readout to zero. The second switches between inch and metric display. The third button turns the power on and off. You can make absolute or relative inside, outside, depth, and step measurements and it can be set to zero at any position. The caliper comes in a nice fitted storage case.

Features

  • 3 Way Electronic Caliper
  • Measuring Range 0 to 6 inch in Fractions and 0 to 150 mm,
  • Resolution 0.0005 INCH - 1/64 in Fractions - 0.01 mm
  • Extra Wide LED Screen
  • Battery Saver Auto Shut Off
  • 2 CR2032-3V Batteries included
    		•

    Digital Caliper 6 inch
    10355
    !
    This 6 inch electronic digital caliper has manual power on and off so it won't go off and lose your measurement. There are three buttons. One turns on the power and sets the readout to zero. The second switches between inch and metric display. The third button turns the power on and off. You can make absolute or relative inside, outside, depth, and step measurements and it can be set to zero at any position. The caliper comes in a nice fitted storage case.

    Pocket Caliper 4 inch
    10350
    !
    Made in USA
    This 4 inch pocket caliper is american made and stainless steel construction.

    Features:
    SAE and Metric dimensions clearly etched on the slide
    Measures outside dimensions starting at 0
    Measures inside dimensions starting at 3/16 inch
    Handy decimal table in 16ths and 32nds etched on back of the caliper

    Weller 25 Watt Soldering Iron Kit USA
    96067
    !
     

    Made in USA by Weller

    This fine US made quality mini-iron is feather-light with a pencil handle that makes it exceptionally easy to maneuver when you're working with hobby kits, radios or electronics. It develops to a temperature of 750 degrees F / 400 degrees C, and it's made with a stainless steel barrel -- and a heat and impact-resistant handle. This kit includes three 1/8-inch nickel-plated tips: MT1 pencil point, MT2 flat screwdriver, MT3 chisel and a soldering aid tool. This product is UL listed for safety

    Specifications:
    Temperature Reaches 750 Degrees F (400 Degrees C)
    Three 1/8 inch Nickel Plated Tip
    Total Length 10 inches
    Handle Length 5 inches
    25 Watt
    UL Listed

    Soldering Station - Variable Temperature 48 Watt
    96054
    !
    This affordable variable temperature soldering station features manual temperature setting by a rotary dial with electronic temperature control. Includes soldering iron stand and special sponge tray as well as grounded output.

    Features:
    For general electronics applications and repair
    On/Off switch with LED indication
    Standard tip: 1.2 mm

    Specifications:
    Heater power for soldering iron: 48 Watt
    Temperature range: 100-450 degrees

    Dimensions:
    7 1/4 inch x 3 31/32 inch x 3 1/2 inch

    Phillips Butane Torch
    96051
    !
    The Phillips Butane Torch achieves a 2500° temperature. It has a waterproof piezo electronic ignition system that has a refillable tank that provides up to 50 minutes of butane capacity. It has a wind resistant flame and meets Consumer Product Safety Standard for multi-purpose lighters (child-resistance). All the heat tools available from Phillips have refillable butane tanks and waterproof piezo electronic ignition systems. Air flow is adjustable to meet specific job-related needs for each product. All products and packages are labeled in English, Spanish, and French.

    AMAZON PRICE - $47.03 - Our Price $19.95

    3M Assorted 3 Piece Sanding Pads
    94307
    !
    Pruchase 2 or more at $3.50 each
    This 3M US made set consists of 1 extra fine, 1 fine and one medium pad. They are flexible for contour or flat surfaces. When you are finished just rinse with water and use them again.

    Pad size
    2 7/8 by 4 by 1/2 inch.

    General 75801 4 in 1 Pin Vise
    79003
    !
    This pin vise is for holding drills, taps, wire, small rods or tools to work on multiple projects. It is great for instruments, models and jewelry, or where ever fine drilling is needed. It contains 2 double ended collets sizes: 0-.125 or 0 to 1/8 inch. There is internal storage under the freewheeling hex shaped spin cap which is perfect for the palm of your hand.

    40% OFF MSRP OF $16.50
    OUR PRICE $9.99

    Part Holder / Pick-Up Tool 2 Prong
    20602
    !
    2 unique looped design prongs to hold diamonds, precious stones, small parts, and odd sized items firmly. Spring loaded with a brass body and a total length of 4 1/2 inches.

    Bernzomatic Electrical Solder
    96049
    !
    Pruchase 2 to 4 at $2.50 each - 5 or more at $2.00
    LEAD FREE rosin core Electrical Solder. This 1 ounce .062 diameter is silver bearing for wire, motors, and appliances.
    NOT FOR PLUMBING

    Made in the USA

    General Tools 71002B Precision Lifting Tool
    10306
    !

    The UltraTech Precision Lifting Tool features a forked head and angled 2 1/2" blade for the removal of tacks, push pins and small nails. Additionally, this tool is great for removing socketed integrated circuits. Features: It provides leverage in removing pins, tacks, nails and integrated circuits. The forked head and angled neck design along with a slim design makes it easy to work in tight spaces. It has an exclusive Versa-Grip handle for comfort and control.
    This tool can be used to slide N scale track joiners

    General Tools 0-80 H2 HSS Tap and Drill Set
     
    79210
    !
    The set includes one 0-80 H2 HSS Tap and one Drill 0-80 (3/64) Tap Drill

    Made by General Tools of NY

    General Tools 1-72 H2 HSS Tap and Drill Set
     
    79211
    !
    The set includes one 1-72 H2 HSS Tap and one Drill 1-72 (53) Tap Drill

    Made by General Tools of NY

    General Tools 2-56 H2 HSS Tap and Drill Set
     
    79212
    !
    The set includes one 2-56 H2 HSS Tap and one Drill 2-56 (50) Tap Drill

    Made by General Tools of NY

    General Tools 4-40 H2 HSS Tap and Drill Set
     
    79213
    !
    The set includes one 4-40 H2 HSS Tap and one Drill 4-40 (43) Tap Drill

    Made by General Tools of NY