!

Weller Replacement Soldering Gun Tip 8200
96109
!
Genuine Weller replacement tip for models 8200 and 8200PK soldering guns.

Gardner Bender Continuity Tester
96035
!

The Gardner Bender Continuity Tester is a battery powered tester used to test all circuits with power off. Ideal for testing fuses, grounds, shorts, contacts, diodes and all circuit components in model railroads, airplanes, boats, and in automotive circuitry. It has a 30 inch test lead with an alligator clip at the end.
One "AA" battery is included
UL Listed

Gardner Bender Low Voltage Tester
96036
!

The Gardner Bender low voltage tester is used to test all circuits with the power on. The case contains a 24V 3W filament fuse that glows when voltage is present. It tests 4.5 To 24 Volts, is UL Listed and ideal for testing fuses, grounds, shorts, contacts, diodes and all circuit components in model railroads, airplanes, boats, and in automotive circuitry. It has a 30 inch test lead with an alligator clip at the end.

Gardner Bender Electrical Test Kit
96037
!

This kit contains 96035, 96036 & 96050. Bright visual indicators let you know the results of the test; the reading is always clear. With these high-quality testers, you can check your electrical systems and wiring for safety It is everything you will need to test low voltage system (4 - 24v), with or without the power on, depending on which tester you will use. This system is perfect for all model hobbies and automotive use.

Anti-Oxidant Grease - Bulb Grease
76028
!

SAME AS BULB GREASE

An 8oz squeeze tube of Ox-Gard Anti-Oxidant Compound. This anti-oxidant grease prevents bulbs from sticking and breaking ensures positive connections and easy removal. It can also be used as conductive grease on train bulbs as well as any bulb around the house, in your car or on boats.

Leviton Continuity Tester
96038
!

Tests the continuity of circuits at home, office, car, boat, and more; battery operated (2 AA batteries not included). Measures 7 inches long and includes a 3 foot long lead with an alligator clip for easy connections. The sliding red covers locks in place to either expose or cover the contact point. This comes with instructions for different tests that can be performed. Remember to turn off the electrical power before using.

Female 3/16 inch Wire Connectors Pack of 7
96029
!
These quick connect females are used on many of the new electronics used by most major model train manufacturers.
For use with 18 - 22 gauge wire.
Use tool 96089 or 40005 to crimp the wire

Female 3/16 inch Wire Connectors Pack of 50
96030
!
These quick connect females are used on many of the new electronics used by most major model train manufacturers.
For use with 18 - 22 gauge wire.
Use tool 96089 or 40005 to crimp the wire

Spade Connectors Pack of 7
96074
!

These 7 spade wire connectors are used on a terminal instead of wrapping bare wire around terminals. For use with 18 - 22 gauge wire. For #8 lugs and smaller. Will fit all Lionel® & AF terminals.  Use tool 96089 to crimp the wire.

Spade Connectors Pack of 50
96075
!
These 50 spade wire connectors are used on a terminal instead of wrapping bare wire around terminals. For use with 18 - 22 gauge wire. For #8 lugs and smaller. Will fit all Lionel® & AF terminals. Use tool 96089 to crimp the wire.

Ring Connectors Pack of 7
96076
!

These 7 ring connectors are used on a terminal instead of wrapping bare wire around terminals. For use with 18 - 22 gauge wire. For #8 lugs and smaller. Will fit all Lionel® & AF terminals.  Use tool 96089 to crimp the wire.

Ring Connectors Pack of 50
96077
!
These 50 ring connectors are used on a terminal instead of wrapping bare wire around terminals. For use with 18 - 22 gauge wire. For #8 lugs and smaller. Will fit all Lionel® & AF terminals.  Use tool 96089 to crimp the wire.

Ring Terminals Pack of 7
96021
!
These 7 ring terminals are for use with 18 - 22 gauge wire.
It is for #4 lugs (about 3.7mm or 1/8")
Use tool 96089 or 40005 to crimp the wire

Ring Terminals Pack of 50

96022
!
These 50 ring terminals are for use with 18 - 22 gauge wire.
It is for #4 lugs (about 3.7mm or 1/8")
Use tool 96089 or 40005 to crimp the wire

Ring Terminals Blue Pack of 7
96023
!
These 7 ring terminals are for use with 14 - 16 gauge wire.
It is for #4 lugs (about 3.7mm or 1/8")
Use tool 96089 or 40005 to crimp the wire

Ring Terminals Blue Pack of 50

96024
!
These 50 ring terminals are for use with 14 - 16 gauge wire.
It is for #4 lugs (about 3.7mm or 1/8")
Use tool 96089 or 40005 to crimp the wire

Insulated Male Bullet Connection Pack of 7
96025
!
These quick insulated male bullet connections are used with # 96027 insulated female sockets to create circuits that can be easily pulled apart
For use with 18 - 22 gauge wire.
Use tool 96089 or 40005 to crimp the wire

Insulated Male Bullet Connection Pack of 50
96026
!
These quick insulated male bullet connections are used with # 96027 insulated female sockets to create circuits that can be easily pulled apart
For use with 18 - 22 gauge wire.
Use tool 96089 or 40005 to crimp the wire

Insulated Female Bullet Socket Pack of 7
96027
!
These quick insulated female bullet socket are used with # 96025 insulated male plugs to create circuits that can be easily pulled apart.
For use with 18 - 22 gauge wire.
Use tool 96089 or 40005 to crimp the wire

Insulated Female Bullet Socket Pack of 50

96028
!
These quick insulated female bullet socket are used with # 96025 insulated male plugs to create circuits that can be easily pulled apart.
For use with 18 - 22 gauge wire.
Use tool 96089 or 40005 to crimp the wire

Insulated Male Bullet Connection Blue Pack of 7
96017
!
These quick insulated male bullet connections are used with # 96027 insulated female sockets to create circuits that can be easily pulled apart
For use with 14 - 16 gauge wire.
Use tool 96089 or 40005 to crimp the wire

Insulated Male Bullet Connection Blue Pack of 50
96018
!
These quick insulated male bullet connections are used with # 96027 insulated female sockets to create circuits that can be easily pulled apart
For use with 14 - 16 gauge wire.
Use tool 96089 or 40005 to crimp the wire

Insulated Female Bullet Socket Blue Pack of 7
96019
!
These quick insulated female bullet socket are used with # 96025 insulated male plugs to create circuits that can be easily pulled apart.
For use with 14 - 16 gauge wire.
Use tool 96089 or 40005 to crimp the wire

Insulated Female Bullet Socket Blue Pack of 50

96020
!
These quick insulated female bullet socket are used with # 96025 insulated male plugs to create circuits that can be easily pulled apart.
For use with 14 - 16 gauge wire.
Use tool 96089 or 40005 to crimp the wire