!

Steel Saw Blade Fine 1 1/4 inch
95202
!
Purchase 2 or more at $5.00 each
This is a 1 1/4 inch hardened steel fine saw blade that is 1/32 inch thick and has a 1/4 inch hole. Order mandrel number 95303. Only use with multi speed tools on slow.

Steel Saw Blade 2 inch
95215
!
This is a 2 inch hardened steel saw blade that is 1/32 inch thick and has a 1/4 inch hole. Order mandrel number 95303. Only use with multi speed tools on slow.

Steel Saw 7 Piece Set
95225
!
This is a great 7 piece high speed steel saw blade set with 2 - 1/4" x 1/8" mandrels that will fit any Dremel.

Included Blades

Blade Size

Number of Teeth

1 inch

36 Teeth

1 1/4 inch

56 Teeth

1 1/2 inch

36 Teeth

1 3/4 inch

74 Teeth

2 inch

48 Teeth


YOU SHOULD USE THESE ONLY WITH MULTI-SPEED TOOLS AND ALWAYS START AT THE SLOWEST SPEED!!

Thin Steel Saw Blade 1 1/2 inch 72T
95212
!
This is a 1 1/2 inch hardened steel saw blade that is 1/64 inch thick and has a 1/8 inch hole and 72 teeth per inch.
Use with mandrel 95302.

Only use with multi speed tools at slower speeds.

Thin Steel Saw Blade 1 3/4 inch 72T
95213
!
This is a 1 3/4 inch hardened steel saw blade that is 1/64 inch thick and has a 1/8 inch hole and 72 teeth per inch.
Use with mandrel 95302.

Only use with multi speed tools at slower speeds.

Thin Steel Saw Blade 2 inch 90T
95214
!
This is a 2 inch hardened steel saw blade that is 1/64 inch thick and has a 1/4 inch hole and 90 teeth per inch.
Use with mandrel 95303.

Only use with multi speed tools at slower speeds.

Thin Steel Saw Blade 5 Piece Set
95211
!
These are 3 hardened steel saw blade that are 1/64 inch thick and 2 mandrels.

Kit Includes one of each
Thin Steel Saw Blade 1 1/2 inch 72 Teeth
Thin Steel Saw Blade 1 3/4 inch 72 Teeth
Thin Steel Saw Blade 2 inch 90 Teeth
1/8 inch Mandrel
1/4 inch Mandrel
* Mandrel Value $7.00 *

Only use with multi speed tools at slower speeds.

Mini Router Bit 10 Piece Set
95759
!
These bits are perfect with any Dremel©. If you're into fine detail work, then this set fits the bill. The bits have a 1/8" shank and should be used with a full router base or router table. The set includes a 3/16" cove, 1/8" corner round, 1/4" straight, 3/16" straight, 1/8" straight, 3/32" beading, 1/8" rabbeting, 1/4" plunge ogee, 1/4" core box, and a 1/4" v-groove. Made from high speed steel and includes a wooden box for storage.

Mandrel 1/16 inch Screw and 1/8 inch Shaft
95301
!
This is the standard mandrel with a 1/16 screw and a 1/8 shaft that comes with Dremel® . It will fit all other hobby moto tools. Not for single speed units, must use on slow.

Mandrel 1/4 inch Screw and 1/8 inch Shaft
95303
!
This mandrel is used with all items that have a 1/4'' hole. It has an 1/8'' shaft and will fit the  Dremel® and all other hobby moto tools.  Not for single speed units, must use on slow.

Four Piece Collet Set
95410
!
This is a Four Piece Collet Set that goes from 0 to a 1/8 inchs. These will fit Dremel® and most other moto tools.

Keyless Finger Chuck
95420
!
This is a Keyless Finger Chuck that goes from 0 to 1/8 inch. It only fits the following Dremesl® #275, 285, 410, 595, 851, 950 and the new Ryobi.

Dremel® #4486 Chuck
95423
!

The Dremel Chuck allows you to quickly and easily change accessory bits on Dremel corded rotary tools or the 9.6V Cordless MultiPro without changing collets.  It will accept all accessory bits with 1/32" to 1/8" shanks. (#275 Single-Speed MultiPro® Rotary Tool #2850-01 Two-Speed MultiPro® Rotary Tool Kit #395 Variable-Speed MultiPro® Rotary Tool #398 Digital Rotary Tool #7800-01 9.6V Cordless MultiPro® Rotary Tool Kit & the 595.)

For use with the following Dremel Tools

275, 285, 395, 398, 400 750, 770, 780 and 800

Also use with Dremel attachments 212, 225, and 575

Finger Chuck with Collets
95450
!
This is a Finger Chuck with a 3/32 shaft. I will give you a free 3/32 collet just in case you don't have one. It goes from 0 to 3/32. For best results, I advise you to cut the shaft a little and always start at the lowest speed. I have sold hundreds of these with great results.

Mini Finger Chuck
95460
!
This is a Mini Finger Chuck with a 1/8 inch shaft. This is designed to hold those 70 to 80 drill bits in your Dremel® or moto tool. Only use with multi speed tools on slow.

Quick Pin Chuck
95452
!
Purchase 2 or more at $6.50 each
This is a new quick pin chuck with 3 collets that comes with 3 collets that can hold a variety of drill bits, burs, etc. from 0 to 3/32. The shaft is 1/4 inch which is great for drill presses and not for use with Dremel.

Finger Chuck for Power Screwdrivers Regular
95465
!
This is a Finger Chuck that is perfect for your 1/4 inch power screw driver. It is great for holding bits from 0 to 1/8 inch.

Finger Chuck for Power Screwdrivers Large
95466
!
This is a Finger Chuck that is perfect for your 1/4 inch power screw driver. It is great for holding bits from 0 to 1/8 inch.

Large Steel Wire Wheels 1 1/2 inch
95590
!
Purchase 5 to 11 at $2.50 each or 12 or more at $2.00 each
This steel wire brush is a full 1 ½ inches of very thick bristles with a 1/8 inch shaft. They hold up nicely when used on slower speeds. Will fit the Dremel® and all other brands of moto  tools.

Large Brass Wire Wheels 1 1/2 inch
95592
!
Purchase 5 to 11 at $2.50 each or 12 or more at $2.00 each
This brass wire brush is a full 1 ½ inches of very thick bristles with a 1/8 inch shaft. They hold up nicely when used on slower speeds. Will fit the Dremel® and all other brands of moto  tools.

Large Cotton Buffer

95593
!
Purchase 2 to 11 at $2.50 each or 12 or more at $2.00 each
A large 1 ½” cotton buffer with 1/8” shaft. A popular item for polishing metal or plastic.

Steel Wire Wheels One Inch
95600
!
Purchase 5 to 11 at $2.00 each or 12 or more at $1.50 each
These 1 inch steel wire wheels are 1/4 inch larger than the Dremel® brand. Can be used with Dremel® or any brand moto tool.

Brass Wire Wheels One Inch
95602
!
Purchase 5 to 11 at $2.00 each or 12 or more at $1.50 each
These 1 inch brass wire wheels are 1/4 inch larger than the Dremel® brand. Can be used with Dremel® or any brand moto tool.

Steel Wire Cup Brush
95610
!
Purchase 5 to 11 at $2.00 each or 12 or more at $1.50 each
This steel wire brush is very thick and has a 1/8 inch shaft and are very useful in removing rust or other cleaning.