Drill Bits

 

Wood Drill Bits
79131
!
This 20 piece set of #61 - 80 drill comes in a very convenient dispensing box. Slide the top to the drill you want, tilt, and out it comes. Super for kit building. A nicely made imported set.
Use with pin vise 79000 or 79001

Titanium Coated Drill Bits #1 thru #60
79136
!
This 60 piece #1 - 60 Titanium Nitride coated drill set will last 6 times longer then regular drill bits. Bits # 1 - 29 are milled and bits # 30 - 60 are ground. All bits have 118º points. The metal index box is numbered with the drill bit size stamped on each row.

Titanium Coated Drill Bit Set 20 Pieces #61 - 80
79145
!
This 20 piece titanium coated drill set of #61 - 80 drill comes in a very convenient dispensing box. Slide the top to the drill you want, tilt, and out it comes. Super for kit building. A nicely made imported set.
Use with pin vise 79000 or 79001

Porter Cable Black Sheild Split Point 7 Piece Drill Bit Set
79140
!
This 7 piece set includes 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 5/32” and 3/16”. It has a black shield finish and resists corrosion. They are precision ground for accurate hole size and comes with an index box.

Steel Drill Bit Set 20 Pieces #61 - 80
79131
!
This 20 piece set of #61 - 80 drill comes in a very convenient dispensing box. Slide the top to the drill you want, tilt, and out it comes. Super for kit building. A nicely made imported set.
Use with pin vise 79000 or 79001

Screw Ease Out #1

79195
!
Made in USA

This #1 ezy-out is 5/64 and used to remove small screws that have broken or have stripped heads. Use with drill or hand tap.

SAE Tap & Die Set
79205
!
A 30 piece super little kit, comes with the following sizes, 0-90, 0-80, 1-64, 1-72, 2-56, 3-48, 3-56 & 4-40, with 2 taps for each die. The handle will do both taps and dies

Rule With Drill Bit Gauge 6 inch
10366
!
Purchase 2 or more at $2.50 each

A super handy 6 inch stainless steel rule with inches and mm, including a drill bit gauge with the following sizes 1/16, 5/64 3/32, 1/8, 9/64 5/32, 11/64 3/16, 13/64, 7/32 & 1/4.

Pin Vise and Drill Bit Set
79100
!
Made in USA

This 4 ¼ inch American Made Pin Vise comes with 12 American Made HSS drill bits #'s 52 thru 74, all even numbers. Drill bits store in the top.

Mini Router Bit 10 Piece Set
95759
!
These bits are perfect with any Dremel©. If you're into fine detail work, then this set fits the bill. The bits have a 1/8" shank and should be used with a full router base or router table. The set includes a 3/16" cove, 1/8" corner round, 1/4" straight, 3/16" straight, 1/8" straight, 3/32" beading, 1/8" rabbeting, 1/4" plunge ogee, 1/4" core box, and a 1/4" v-groove. Made from high speed steel and includes a wooden box for storage.

Metric Tap & Die Set
79200
!
A 30 piece super little kit, comes with the following sizes,1.0, 1.1, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2 & 2.5, with 2 taps for each die.  The handle will do both taps and dies.

Metric Drill Bit
79128
!
A great high speed steel 15 piece metric drill set in a plastic pouch. Sizes are 1.05, 1.10, 1.15, 1.20, 1.25, 1.30, 1.35, 1.40, 1.45, 1.50, .55, 1.60, 1.70, 1.80, .190, &2.00mm
Use with pin vise 79000 or 79001

Metric 15 Piece Drill Bit Set 1.05 to 2.00mm
79128
!
A great high speed steel 15 piece metric drill set in a plastic pouch. Sizes are 1.05, 1.10, 1.15, 1.20, 1.25, 1.30, 1.35, 1.40, 1.45, 1.50, .55, 1.60, 1.70, 1.80, 1.90, 2.00mm
Use with pin vise 79000 or 79001

Metric 15 Piece Drill Bit Set 0.30 to 1.0mm
79127
!
A great high speed steel 15 piece metric drill set in a plastic pouch. Sizes are 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, & 1.0mm.
Use with pin vise 79000 or 79001

Metric 15 Piece Drill Bit Set 2.05 to 3.00mm
79129
!
A great high speed steel 10 piece metric drill set in a plastic pouch. Sizes are 2.05, 2.10, 2.15, 2.20, 2.25, 2.30, 2.35, 2.40, 2.45, 2.50, 2.60, 2.70, 2.80. 2.90 and 3.00mm
Use with pin vise 79000 or 79001

Long Drill Bits
79112
!
Made in USA

These  AMERICAN MADE  Tempered High Speed Steel bits are each 2” long for deep drilling.  Included are drill bits # 52 – 74, every even number.

High Speed Steel Drill Bit Set
79126
!

This 6 piece set has 0.8, 1.0, 1.2, 1.4, 1.6 and 1.8mm drills in a very convenient storage box. They range in length from 1 1/8 to 1 3/4 inch.
Use with pin vise 79000, 79001 or 79005

Drill Gauge 61 - 80
79133
!

This American made drill gauge is a must for 61 to 80 drills.  When you spill your drills, pop it into the holes for a perfect size every time.

Drill Bit
79180
!
Purchase 6 or more at $0.75 each
# 80 high speed steel drill bit

Diamond Drill Bit Set 20 Pieces #61 - 80
79132
!
This 20 piece set of #61 - 80 DIAMOND TIPPED drill bits comes in a very convenient dispensing box. Slide the top to the drill you want, tilt, and out it comes. Super for plastic kits and precise drilling. A nicely made imported set.
Use with pin vise 79000 or 79001

Diamond Drill Bit
79132
!
This 20 piece set of #61 - 80 DIAMOND TIPPED drill bits comes in a very convenient dispensing box. Slide the top to the drill you want, tilt, and out it comes. Super for plastic kits and precise drilling. A nicely made imported set.
Use with pin vise 79000 or 79001

Diamond Coated Drill Bits 10 Pieces
79147
!

Diamond coated drill bits 10 pieces are on 1/8" Shanks and range in sizes #42 - #70. These are perfect for drilling glass, ceramics, and metal. Comes with a convenient storage case and dispenser.

Carbide Drill Bits 10 Pieces
79120
!
Made in USA

This 10 piece random assortment of American Made drill bits comes with 1/8" shafts and a storage box. These bits are super sharp but super fragile. Storage boxes may vary.
Use with pin vise 79000 or 79001

12 Piece Drill Bit Set #52 - 74
79110
!
Made in USA

This American Made HSS drill set comes with 12 drill bits #52 to #74, every even number (52, 54 etc.).
Use with pin vise 79000 or 79001