Tin Plate Tools

 

Track Pliers

10100
!
This item is IN STOCK
These 7" track pliers have a crimping nib to tighten the pins on Standard, 027 and "0" gage track. Just one squeeze and the pins are tight again.. These pliers are machined in the US and come with a lifetime warranty.

Deluxe Wheel Puller 0, 027 ,STD, G, & S

10202
!
Made in USA

This deluxe wheel puller will remove all of Standard, and most of "O", O27, S and G gauge engine wheels. It features four jaws, two pins, one handle and one frame unit. The pins and jaws are made of hardened steel.

Track Eraser / Cleaner

10310
!
Purchase 2 or more sets at $2.50 each
Made in USA

A great little eraser for cleaning HO, N, Z & G track of hard to remove dirt. Can also be used for Slot Car track and Slot Car pick-ups. Can be used to remove rust from some materials. A very handy little accessory.

Scale Steel Ruler 12 inch

10360
!
Made in USA

American made 12" steel ruler for HO, N, S & 0 scales. Has 3.5mm for HO, 1.92mm for N, 3/16" for S, ¼" for O with 1/160 & 1/64 scales. It also has drill and screw sizes on the back. A super accessory needed by every modeler.

Split Head Screw Driver Set

20206
!
Made in USA

This American made set of a 5 and 6 1/2 inch screw starters will solve all your problems of lost screws on the floor. Put the screw on the end, slide the plastic shaft down and that's it. This size will do screws from #'s 0 to 4 most HO and all of 0, S & G slotted screws)
NEVER DROP A SCREW AGAIN

Phillips Screw Starter for #1 to #3

20210
!
Made in USA

This American made Phillips screw starter is only 3/16 inch thick to get into those hard to reach places. It is 6 inch long and will accommodate #'s 1 to 3 Phillips screws. Perfect for some N, HO, and all of O, S and G.

NEVER DROP A SCREW AGAIN

Slotted Screw Starter for #1 to #3

20214
!
Made in USA

This American made slotted screw starter is only 3/16 inch thick to get into those hard to reach places. It is 6 inch long and will accommodate #'s 1 to 3 slotted screws. Perfect for some N, HO, and all of O, S and G

NEVER DROP A SCREW AGAIN

12 in 1 Screw Driver

20517
!
2002  #1 NEW TOOL AT THE  CHICAGO HARDWARE SHOW!
If there was ever the perfect hobby screw driver here it is.  All hardened tips, Phillips – 00, 0 & 1, Torx  5, 6, 7, 8, 10 & 15 and 3 super small slotted.  Magnetizer, demagnetizer, stubby screwdriver, pocket clip and built in extension. Closed it is 6” and extends to over 8 ½.

Pin Punch 4 Piece Set

25000
!
A good item to help remove rivets when fixing or restoring trains. Short of a press, this set will remove some of the smallest rivets. It has a 1/16, 3/32, 1/8 and 5/32.

Pin Punch 8 Piece Set

25005
!
A good item to help remove rivets when fixing or restoring trains. Short of a press, this set will remove some of the smallest rivets. It has a 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 5/16.

Center Punch 5 Piece Set

25030
!
Use to flare rivets. Consists of 1/16, 1/8, 5/32, 3/16 and 1/4 inch ends. Will not give you the rolled feature but it is fine for the runner.

Fiberglass Scratch Brush

30400
!
Purchase 2 or more at $3.50 each

This fiberglass scratch brush dials like a mechanical pencil allowing you to choose the courseness of the tip. It is used for removing rust or corrosion in hard to reach places. It is excellent for cleaning electrical commutators and cleaning metal for soldering.
Also available
Brass Scratch Brush Item 30401
Steel Scratch Brush Item 30402
Scratch Brush 3 Piece Set 30403

Flat Billed Pliers

60412
!
This is a 4 ½ inch long, spring loaded flat billed pair of pliers with vinyl grips. Perfect for reshaping Lionel® track or gripping items.

End Cutting Pliers

60450
!
This is a 4 ½ inch long, spring loaded end cutting pair of pliers with vinyl grips. These are great for reshaping Lionel® track or cutting wire and other soft metals from the end.

Hypo Oiler

76050
!
Purchase 2 or more at $2.50 each
Made in USA

This hypodermic irrigating needle (flat) is perfect for putting oil exactly where you want it.  This is a 3cc plastic case with a 20-guage 3” long blunt surgical steel end.  Comes with a plastic cap for a non-leak permanent storage of oil.

Spring Loaded SpringHook

84608
!




NOTHING BETTER

Push down on the rubber top, a mini hook comes out the other end, grab the spring or part and let go. The hook gently retracts and holds the spring or part. Perfect for replacing KD® springs in couplers.

Vacuum Attachment

87100
!
The easiest way to dust your collection or layout. I had an "N" scale club try this one and they raved. It took the dust but not the layout details. Use on vehicle displays. Hooks up to any normal vacuum, has holes built in so that not to much suction ruins your display. You have some control by turning the large hose nozzle. Great for pockets in real cars, trains, dolls doll houses, computers and many other places.

Electric Circuit Tester

96055
!
This is an electric circuit tester for up to 18 volts. The length of the cord is four feet. A very simple tester that will help you find broken circuits. Put the allegator clip on one end and touch the tool to the other, if the light goes on, the circuit is complete, if not there is a break to repair. A super handy item for the train layout. Actual case may vary.

Two Prong Electrical Connector

96100
!
Purchase 6 or more at $1.50 each
These 2 prong connectors, one male, one female, are gold plated, 22 gage wire and will make connections simple.  They are about 1/16” inch thick 3/16” wide with wires 6” long with ½” tined leads.

Three Prong Electrical Connector

96102
!
Purchase 6 or more at $1.75 each
These 3 prong connectors, one male, one female, are gold plated, 22 gage wire and will make connections simple.  They are about 1/16” inch thick 1/4” wide with wires 6” long with ½” tined leads.

Four Prong Electrical Connector

96104
!
Purchase 6 or more at $2.00 each
These 4 prong connectors, one male, one female, are gold plated, 22 gage wire and will make connections simple.  They are about 1/16” inch thick 3/8” wide with wires 6” long with ½” tined leads.

Two Mini Bulbs 12 volt

96110
!
This is for two 12v mini bulbs, each is about 1/8" x 3/8" with 4" leads.

Part Holding Clamp

96124
!
Purchase 2 or more at $3.50 each

This super little clamp is spring loaded, push to open, insert part and let go.  The springs gently hold the part while you repair or glue from “0” to 1 ½”.

Swivel Table Vise 2 1/4 inch

96165
!
This is the one you need, an all aluminum bench vise. The jaws swivel in any direction. The 3 inch wide jaws have removable rubber caps to protect the item you are working on and opens up to 2 1/4 inches wide. The vise will clamp to any beanch up to 2 1/2 inches deep.
Specification:
Jaw Opening 2 1/4 inches
Jaw Width 3 inches
Aluminum Body